Hi miro.
it's Arrive.
http://a2.ec-images.myspacecdn.com/images02/146/2dc6b77042d94d80ad2939b351ba2592/l.jpgHowever, now, I do not have time exactly and it only inspected CF+ boards.
I would like to check early.
> Do I see right on the photo that it does not require external power but is fed through SCSI DB25 connector?
YES. power from DB25 Only Bak monolith attached CF Power Monster II and CFcard using.
Bak monolith has External power input too, and using "2.5 inch SCSI HDD" or " Need huge power device connection".
That's answer from Maker
”Mac*, AKAIサンプラーなどの25pin外部SCSIコネクターに直接接続して、CF PowerMonsterを外部電源不要**で動作”
It connects with 25pin external SCSI connectors, such as Mac* and an AKAI sampler, directly, and operates CF PowerMonster by external power needlessness **.
*Mac SE, SE/30, Mac II, IIx, IIcx, IIcx, Quadra 700など。Mac Plus、Portableは、内部ターミネーター電源がないため、外部電源が必要
* Mac SE, SE/30, Mac II, IIx, IIcx, IIcx, Quadra 700, etc. Since Mac Plus and Portable do not have an internal terminator power supply, an external power is required for them.
* At the time of *CF PowerMonster and CF PowerMonster II use
2.5" -- at the time of hard disk use, an external power is required.
W30 SCSI DB25. Since it is not investigating, I connect it and whether the power supply is taken out with the course still tries.